PRO MOTO™ CARBON FLAT BAR

• 660mm width with graduated ends for easy trimming
• 5°, 11° or 17° bends, 25.4mm clamp
• 11° or 17° bend, 31.8mm clamp
• 140 grams at full 660mm width
• Carbon weave finish
• NOTE: Not for use with bar ends

PRO MOTO™ CARBON LOW RISE XC BAR

• 680mm width with graduated ends for easy trimming
• 25.4 or 31.8mm clamp diameter
• 20mm rise
• 6° upsweep with 10° backsweep
• At full width: 25.4mm is 148 grams, 31.8mm is 172 grams
• For XC use
• Carbon weave finish
• NOTE: Not for use with bar ends

PRO MOTO™ CARBON RISER BAR

• 680mm width with graduated ends for easy trimming
• 31.8mm clamp diameter
• 32mm rise
• 6° upsweep with 10° backsweep
• 165 grams at 680mm width
• For XC use
• Carbon weave finish
• NOTE: Not for use with bar ends

PRO MOTO™ FLAT BAR

• 7075-T6 aluminum
• Quad butted areas on each side
• Graduated ends for easy trimming
• 5° or 11° bend, 25.4mm clamp, 188 grams at full 660mm width
• 11° or 17° bend, 31.8mm clamp, 261 grams at full 710mm width
• Black bead-blast finish

MOTO ACE™ FLAT BAR

• 2014-T6 aluminum, butted
• 660mm width
• 11° or 17° bend, 25.4mm clamp
• 177 grams at full width
• Black bead-blast finish

PRO MOTO™ XC RISER BAR

• 7075-T6 aluminum
• 680mm width with graduated ends for easy trimming
• 32mm rise
• 10° x 6° bend , 31.8mm clamp
• 286 grams at full 680mm width
• Black bead-blast finish

PRO MOTO™ LOW-RISE XC BAR

• 7075-T6 aluminum
• 680mm width with graduated ends for easy trimming
• 20mm rise
• 10° x 6° bend , 31.8mm clamp
• Black bead-blast finish

MOTO ACE™ RISER BAR

• 2014-T6 aluminum
• 660mm width, 32mm rise
• 32mm rise
• 10° x 6° bend , 25.4mm clamp
• 296 grams at full width
• Black bead-blast finish

LOCO™ DH RISER BAR

• 7075-T6 aluminum
• 710mm width with graduated ends for easy trimming
• 32mm rise
• 10° x 6° bend, 31.8mm clamp
• 385mm grams at full 710mm width
• Black bead-blast finish