2014 Beargrease
2014 Beargrease
This is an archived bike model. Explore the current range of Salsa bikes here.
Warning for Residents of California
Warning for Residents of California
⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Share
Product Details
Build Kit
- Frame : Beargrease Carbon
- Color: Matte Carbon w/Blue
- Fork: Salsa Makwa Carbon, Tapered, Thru-Axle, Suspension Corrected with 51mm Offset
- Headset: Cane Creek 40 IS
- Stem: Truvativ T20
- Handlebar: Salsa Flat, 11°, 700mm
- Grips: Salsa Backcountry Lock-On
- Shifter: SRAM X.9 Ball Bearing
- Front Brake: Avid BB7S
- Rear Brake: Avid BB7S
- Brake Lever: Avid SD7
- Rotors: 160mm Front/140mm Rear
- Seatpost: Truvativ T20
- Saddle: WTB
- Front Der: SRAM X.7
- Rear Der: SRAM X9
- Front Hub: Salsa Fat Conversion Hub, 15 x 142mm, 32h
- Rear Hub: Salsa Fat Conversion Hub, Alloy Freehub body, 12 x 177mm, 32h
- Spokes: DT Swiss Competition
- Rims: Surly Holy Rolling Darryl
- Tires: 45N Dillinger 26 x 4.0", 120tpi Folding
- Cassette: SRAM PG-1050 11-36t
- Chain: KMC X10
- Crankset: SRAM X9 Fatbike, 22/36t
- Bottom Bracket: SRAM PressFit GXP, 41 x 121mm
- Complete Bike: 3499
- Frameset: 2599
- Complete Bike Weight: SM 29 lbs / MD 29 lbs 2 oz / LG 28 lbs 14 oz / XL 29 lbs
Frame Specs
- Frame: 2014 Beargrease Carbon XX1
- Wheelsize: 26" fat bike (closer to 29" in diameter in reality)
- Tire Clearance: Designed for 26 x 4.0" tires on 82mm rims
- Fork: Salsa Makwa Carbon Fork included
- Headset-Upper: IS41/28.6
- Headset-Lower: IS52/40
- Seatpost: 27.2mm
- Seat Collar: 35.0mm. Salsa Lip-Lock included
- Front Derailleur: Salsa direct-mount clamp included, high direct-mount front derailleur for 2x compact; top-pull only
- Bottom Bracket: 121mm PressFit
- Crankset: Fat bike 1x or 2x compatible; max chainring sizes: 1x (32t), 2x (36/24t)
- Front Brake: 74mm post mount for 160mm rotor, maximum rotor size 180mm
- Rear Brake: 74mm post mount for 140mm rotor, maximum rotor size 160mm
- Front Spacing: 142 x 15mm thru-axle
- Rear Spacing: 177 x 12mm thru-axle
- Bottle Mounts: 1 per frame size SM, 2 per frame sizes MD–XL
- Derailleur Hanger: FS2323
- Cable Routing: Full housing: internal shift routing, external brake routing
- Frame Weight: SM: 1480g, MD: 1360g, LG: 1640g, XL: 1660g
- Fork Weight w/Uncut Steerer: 730g
- Color: Matte Carbon w/ Blue Purple
Geometry
| Small | Medium | Large | X-Large | |
|---|---|---|---|---|
| Top Tube Effective Metric | 580 | 605 | 625 | 640 |
| Seat Tube Length Metric | 381 | 432 | 483 | 533 |
| Head Tube Length Metric | 105 | 125 | 140 | 150 |
| Head Tube Angle | 68.5 | 68.5 | 68.5 | 68.5 |
| Seat Tube Angle | 73.5 | 73 | 73 | 73 |
| BB Drop Metric | 63 | 63 | 63 | 63 |
| Chainstay Length Metric | 440 | 440 | 440 | 440 |
| Fork Length Metric | 483 | 483 | 483 | 483 |
| Fork Offset Metric | 51 | 51 | 51 | 51 |
| Wheelbase Metric | 1103.1 | 1124 | 1145.3 | 1161.1 |
| Stack Metric | 594.4 | 613 | 627 | 636.3 |
| Reach Metric | 403.9 | 417.6 | 433.3 | 445.5 |
| Standover Metric | 708.2 | 740.1 | 780.6 | 818.3 |
| Rider Height Metric | 165cm–175cm | 173cm–183cm | 180cm–191cm | 188cm–UP |
| BB Center to Center Metric | ||||
| Stem Length | 60 | 70 | 80 | 80 |
| Crank Length | 170 | 170 | 175 | 175 |
| Handlebar Width | 700mm | 750mm | 750mm | 750mm |
| Seatpost Offset Metric | 9mm | 9mm | 9mm | 9mm |
Measurements based on:
- a Salsa Makwa fork which is equivalent to an average 100mm fork at 20% sag.
- a 26 x 4.0" tire measuring 742mm in diameter.
- standover (P) measured vertically to top of toptube from a position 50mm forward of BB center.
Additional Features
Beargrease - Endure Geometry
Designed as a racing fatbike with race agility. Features new geometry with a compact rear end that meets the demands of even the most aggressive racer, while still maintaining the proper weight distribution and stability required for navigating varied and difficult surface conditions. Maximized standover clearance aids dabbing, stopping, and restarting in tough trail conditions
Full-Carbon Layup
Equivalent to 170mm rear spacing, but thru-axle design adds convenient hub catches that make wheel removal/installation easier; results in a stronger, symmetrical rear wheel while maintaining proper chainline with 100mm bottom bracket
177mm Rear Spacing
Equivalent to 170mm rear spacing, but thru-axle design adds convenient hub catches that make wheel removal/installation easier; results in a stronger, symmetrical rear wheel while maintaining proper chainline with 100mm bottom bracket
177 x 12mm DT Swiss RWS Thru-Axle
Improved rear end stiffness for precise handling and tool-free wheel changes
Tapered Headtube
Allows use of tapered and standard 1-1/8" forks
Shaped Chainstays and Seatstays
Double-bend design provides maximum heel clearance in winter boots
Extra-Wide Downtube
Large downtube acts as fender and helps keep the crud off your body
Direct-Mount Front Derailleur Adapter
Salsa offset direct-mount adapter adds flexibility to drivetrain setup, and allows clean 1x build
27.2mm Seatpost
For rider comfort
Full-Length Cable Routing
Improved performance in poor conditions
Rear Tire Clearance
Designed for 26 x 4.0" tires on 82mm rims with full drivetrain. Compatible with 29+ tires on 50mm rims with full drivetrain. Compatible with 26 x 4.0" tires on 90/100mm rims. Tires measuring an actual 4.3–4.7" (regardless of rim width) will fit but will require drivetrain modification. Not compatible with Surly Bud and Lou tires
Bottle Mounts
Frame accepts 2 bottle cages (1 on SM)
Salsa Makwa Carbon Fork Included
Ultra-light carbon monocoque fork. Full-carbon tapered steerer tube. Oversized fat bike-appropriate blades. 15mm thru-axle. 74mm post mount
142mm Fork Spacing
Equivalent to 135mm front spacing, but with convenient hub catches that make wheel removal/installation easier
142 x 15mm Front Thru-Axle
Improved front end stiffness, precise handling, and tool-free wheel changes
Warranty Information
All Salsa products are warranted against manufacturing defects in materials and workmanship from the date of retail purchase of the product, subject to the limitations detailed below.

